|
|
|
Printing Instructions |
|
Garware
|
Garfilm
EM6
|
Polyethylene Terephthalate (PET)
|
|
|
|
|
|
Description
|
Garfilm EM6 is a Milky White Film |
Applications
|
EM6
is specially developed as an insulating material for rotating
electrical machines, it exhibits superior thermal ageing
performance compared to normal polyester films.
|
Pre-treatment
|
No
Pre-Treatment
|
Approvals
|
None
|
|
|
|
|
|
Properties |
Unit |
Test
Method |
Other |
|
|
|
Thickness
Micron |
um |
Micrometer
method
|
|
250 |
350 |
|
Thickness Gauge |
gauge |
|
|
1000 |
1400 |
|
Thickness
Thou |
" |
|
|
.010 |
.014 |
|
Yield |
Substance
Yield g/M2 |
g/M2 |
|
|
357 |
500 |
|
Yield
M2/ Kg |
M2/Kg |
|
|
2.8 |
2
|
|
Optical
Properties |
Haze |
% |
ASTM D 1003 |
|
88 |
94
|
|
Mechanical
Properties MD / TD |
Tensile Strength |
kgf/cm2 |
ASTM D 882
|
|
1800 |
1600
|
|
Elongation
at break |
% |
ASTM D 882
|
|
150 |
150
|
|
Thermal |
Melting
Point |
°C |
DSC
|
|
255 |
255
|
|
Coeff
of thermal expansion |
1/K(cm/cm°C) |
|
between
20°C&50°C |
36x10-6(MD)
23X10-6(TD) |
36x10-6(MD)
23X10-6(TD) |
|
Specific
Heat
|
cal/g°C
|
|
25°C
|
0.32
|
0.32
|
|
Shrinkage
|
MD
|
%
|
ASTM
D 1204
|
150°C/30
min
|
1 |
1 |
|
TD
|
%
|
ASTM
D 1204
|
150°C/ 30
min
|
0.4 |
0.4 |
|
MD
|
%
|
ASTM
D 1204
|
200°C/30
min
|
7 |
7 |
|
TD
|
%
|
ASTM
D 1204
|
200°C/30
min
|
7 |
7 |
|
Electrical
|
Break
Down Voltage (on 2"Brass Electrode)
|
KV
|
ASTM
D 149
|
|
19.5
|
22.5
|
|
Surface
Resistivity
|
Ohm
|
ASTM
D 257
|
|
10
x (pow.12)
|
10
x (pow.12)
|
|
Volume
Resistivity.
|
Ohm
cm
|
ASTM
D 257
|
|
10
x (pow.16)
|
10
x (pow.16)
|
|
Dielectric
Constant
|
-
|
ASTM
D 150
|
|
2.8
to 4.0
|
2.8
to 4.0
|
|
Permitivity
|
|
|
|
|
|
|
23°C,
50 Hz
|
-
|
IEC
250
|
|
3.26
|
3.26
|
|
23°C,1kHz
|
-
|
IEC
250
|
|
3.24
|
3.24
|
|
23 °C,10kHz
|
-
|
IEC
250
|
|
3.21
|
3.21
|
|
0 °C,50 Hz
|
-
|
IEC
250
|
|
3.26
|
3.26
|
|
50 °C, 50 Hz
|
-
|
IEC
250
|
|
3.27
|
3.27
|
|
100 °C, 50Hz
|
-
|
IEC
250
|
|
3.35
|
3.35
|
|
150 °C,50Hz
|
-
|
IEC
250
|
|
3.65
|
3.65
|
|
Dissipation
Factor
|
|
|
|
|
|
|
23 °C,50Hz
|
|
IEC
250
|
|
0.002
|
0.002
|
|
23 °C,1kHz
|
|
IEC
250
|
|
0.0055
|
0.0055
|
|
23 °C,,10
kHz
|
|
IEC
250
|
|
0.011
|
0.011
|
|
0 °C,50 Hz
|
|
IEC
250
|
|
0.004
|
0.004
|
|
50 °C,50 Hz
|
|
IEC
250
|
|
0.0015
|
0.0015
|
|
100 °C,50 Hz
|
|
IEC
250
|
|
0.007
|
0.007
|
|
150 °C,,50
Hz
|
|
IEC
250
|
|
0.006
|
0.006
|
|
Other
|
Density
|
gm/cc
|
ASTM D 1505
|
|
1.4
|
1.4
|
|
Slip(COF)
|
|
ASTM D 1894
|
|
0.3
|
0.3
|
|
Water
Absorption(Max)
|
%
|
ASTM
D 570
|
|
0.6
|
0.6
|
|
Oligomer
Extraction
|
%
|
Micrometer
method
|
|
1.5
|
1.5
|
|
Other |
|
|
Other
Specifications: |
|
|
|
PSG
Group Ltd. - Disclaimer
All technical information and related data supplied by or on behalf
of PSG
Group Ltd. (and subsidiary companies) is believed to be accurate
and
complete. However, it will remain the responsibility of the purchaser
/ user
to determine the suitability of each product for a particular application
and shall assume all risk and liability in connection therewith.
No warranty is implied with regard to information or recommendations
given
by our distributors and or subcontractors.
The descriptions of products and services displayed on this web site
and the
terms under which they are given may be modified at any time without
notice.
In any event or occurrence, our liability is strictly limited to
the value
of the original invoice.
Any links on this site are for the convenience of the visitor only
and we
are not responsible for their content. |
Garfilm is the registered trademark
for Garware |
|