Properties |
Unit |
Test
Method |
Other |
|
|
|
Thickness
Micron |
µm |
Micrometer
method
|
- |
23 |
- |
- |
Thickness Gauge |
gauge |
- |
- |
92 |
- |
- |
Thickness
Thous |
" |
- |
- |
.0010 |
- |
-
|
Yield |
Substance Yield G/M2 |
G/M2 |
- |
- |
32 |
- |
- |
Yield
M2/ Kg |
M2/Kg |
- |
- |
31 |
|
- |
Mechanical
Properties MD |
Tensile Strength
|
N/mm2
|
ISO-527-1-2
|
Test
speed 100%/min
23°C, 50%r.h. |
MD
180 |
-
|
- |
Elongation
at break |
% |
ISO-527-1-2
|
Test
speed 100%/min
23°C, 50%r.h. |
MD
130 |
-
|
- |
Tensile
Stress required to cause 5% elongation {F5 value}
|
N/mm2
|
ISO-527-1-2
|
Test
speed 100%/min
23°C, 50%r.h.
|
MD110
|
-
|
-
|
Mechanical
Properties TD |
Tensile
Strength |
N/mm2 |
ISO-527-1-2
|
Test
speed 100%/min
23°C, 50%r.h. |
TD
280 |
-
|
- |
Elongation
at break |
% |
ISO-527-1-2
|
Test
speed 100%/min
23°C, 50%r.h. |
TD
70 |
-
|
- |
Tensile
Stress required to cause 5% elongation {F5 value}
|
N/mm2
|
ISO-527-1-2
|
Test
speed 100%/min
23°C, 50%r.h.
|
MD110
|
-
|
-
|
Thermal |
Shrinkage |
% |
DIN
40634
|
150°C,
15 min |
MD1.2 |
-
|
- |
|
% |
DIN
40634
|
150°C,
15 min |
TD
0.1 |
-
|
- |
Optical
|
Transparency
|
%
|
ASTM
D 1003-61 Method A
|
value
77
|
-
|
-
|
-
|
Surface
|
Coefficient
of friction {static}
|
-
|
DIN
53375 or ASTM
D 1894-
|
value
0 .35
|
-
|
-
|
-
|
Gloss
|
-
|
DIN
67530
|
value
20
|
Test
measuring angle 60°
|
-
|
-
|
Physical/Chemical
|
Density
|
g/cmx3
|
ASTM
D 1505-68T Method C
|
value
1.395
|
Test 23°C
|
-
|
-
|
Remarks
|
SP
complies with FDA regulation 21CFR
177.1630. |
Range
of
Thickenesses: 23 micron |
The
above data is typical of property values. |
|
|
|
|
PSG
Group Ltd. - Disclaimer
All technical information and related data supplied by or on behalf
of PSG
Group Ltd. (and subsidiary companies) is believed to be accurate
and
complete. However, it will remain the responsibility of the purchaser
/ user
to determine the suitability of each product for a particular application
and shall assume all risk and liability in connection therewith.
No warranty is implied with regard to information or recommendations
given
by our distributors and or subcontractors.
The descriptions of products and services displayed on this web site
and the
terms under which they are given may be modified at any time without
notice.
In any event or occurrence, our liability is strictly limited to
the value
of the original invoice.
Any links on this site are for the convenience of the visitor only
and we
are not responsible for their content. |
®Hostaphan is the registered
trademark for Mitsubishi Polyester Film GmbH. |