|
|
|
Printing Instructions |
|
Toray Plastics Europe SA
|
Claryl® 34.31
|
Polyethylene Terephthalate (PET)
|
|
|
|
|
|
Description
|
Claryl® 34.31
is a one side metallised bioriented polyester film with
the other side modified to improve ink adhesion. balanced
mechanical properties.
|
Applications
|
All
non transparent packaging applications:
•High
barrier properties
• Improved
ink adhesion (ink ranges are increased
• High
quality printings on the modified side |
Pre-treatment
|
One
side
|
Approvals
|
Claryl® 34.31
complies with the legal requirements in FRANCE, EUROPE,
USA.... for material intended to be used in contact with
foodstuffs.
(Please
refer to the 'Food Contact Data Sheet', available on request) |
Key
Features
|
• Very
High barrier to water vapour, oxygen and other gases
• Good
flavour protection
• Protection
against natural and UV light
• Thermal
stability
• Improved
ink adhesion on one side
|
|
|
|
|
|
Properties |
Unit |
Test
Method |
Other |
|
|
|
Thickness
Micron |
um |
Micrometer
method
|
|
12 |
|
|
Thickness Gauge |
gauge |
|
|
48 |
|
|
Thickness Thos |
" |
|
|
.0005 |
|
|
Yield |
Substance Yield G/M2 |
G/M2 |
|
|
17 |
|
|
Yield
M2/ Kg |
M2/Kg |
|
|
59 |
|
|
Mechanical
Properties MD |
Breaking
Strength |
daN/mm2 |
ASTM
D 882
|
|
22 |
|
|
Elongation
at break
|
%
|
ASTM
D 882
|
|
110
|
|
|
Stress
to produce 5% elongation
|
daN/mm2
|
ASTM
D 882
|
|
10.0
|
|
|
Mechanical
Properties TD
|
Breaking
Strength
|
daN/mm2
|
ASTM
D 882
|
|
23
|
|
|
Elongation
at break
|
%
|
ASTM
D 882
|
|
110
|
|
|
Stress
to produce 5% elongation
|
daN/mm2
|
ASTM
D 882
|
|
10.5
|
|
|
Shrinkage |
MD |
% |
|
150°C
30mn |
1.9 |
|
|
TD |
% |
|
150°C
30mn |
0.6 |
|
|
Gas
Permeabilities
|
Oxygen
23°C
|
cm3/m2/24h
|
ASTM D 3985
|
|
<1
|
|
|
Metallisation
|
Optical
desity
|
|
MACBETH
|
|
2.8
|
|
|
|
Other
Specifications: |
|
PSG
Group Ltd. - Disclaimer
All technical information and related data supplied by or on behalf
of PSG
Group Ltd. (and subsidiary companies) is believed to be accurate
and
complete. However, it will remain the responsibility of the purchaser
/ user
to determine the suitability of each product for a particular application
and shall assume all risk and liability in connection therewith.
No warranty is implied with regard to information or recommendations
given
by our distributors and or subcontractors.
The descriptions of products and services displayed on this web site
and the
terms under which they are given may be modified at any time without
notice.
In any event or occurrence, our liability is strictly limited to
the value
of the original invoice.
Any links on this site are for the convenience of the visitor only
and we
are not responsible for their content. |
Claryl® is a registered
trademark of Toray Industries, Inc. for its range of Polyester
Films based on Polyethylene Terephthalate. |
|