|
|
|
Printing Instructions |
|
Toray Plastics Europe SA
|
Lumirror® 60.01
|
Polyethylene Terephthalate (PET)
|
|
|
|
|
|
Description
|
Lumirror® 60.01
is a plain film with moderate haze and high rouhness on
both sides produced by coextrusion. Balanced
tensile properties.
|
Applications
|
Electrical
Insulation, base for coatings, silicone coatings with
solvents, mould release.
|
Pre-treatment
|
high
rouhness on both sides
|
Approvals
|
Lumirror® 60.01
is a multilayer structure produced by coextrusion. According
to its total properties and to the composition of the structure
surface layers, these films are said to comply with the
requirements in FRANCE, EUROPE, USA for the materials intended
in contact with foodstuffs.
(Please
refer to the 'Food Contact Data Sheet', available on request) |
Key
Features
|
• Excellent
dimensional stability and mechanical properties
• Very
good machinability due to rough surfaces.
• UL
approvals: 105°C - UL 94 VTM 2
|
|
|
|
|
|
Properties |
Unit |
Test
Method |
Other |
|
|
|
Thickness
Micron |
um |
Micrometer
method
|
|
36 |
50 |
|
|
gauge |
|
|
144 |
200 |
|
Thickness Thos |
" |
|
|
.0014 |
.002 |
|
Yield |
Substance Yield G/M2 |
G/M2 |
|
|
50 |
71 |
|
Yield
M2/ Kg |
M2/Kg |
|
|
20 |
14 |
|
Optical
Properties |
Haze
GARDNER |
% |
ASTM
D 1003 |
|
8 |
11
|
|
Mechanical
Properties MD |
Breaking
Strength |
daN/mm2 |
ASTM
D 882
|
|
20 |
20
|
|
Elongation
at break
|
%
|
ASTM
D 882
|
|
140
|
140
|
|
Stress
to produce 5% elongation
|
daN/mm2
|
ASTM
D 882
|
|
10.5
|
10.5
|
|
Elastic
modulus
|
daN/mm2
|
ASTM
D 882
|
|
445
|
445
|
|
Shrinkage |
MD |
% |
Internal
Method |
150°C
30mn |
1.2 |
1.2
|
|
TD |
% |
Internal
Method |
150°C
30mn |
0.6 |
0.6
|
|
Surface
Properties
|
Roughness
RZ
|
nm
|
DIN
4768
|
|
500
|
500
|
|
Other |
|
Other
Specifications: |
|
PSG
Group Ltd. - Disclaimer
All technical information and related data supplied by or on behalf
of PSG
Group Ltd. (and subsidiary companies) is believed to be accurate
and
complete. However, it will remain the responsibility of the purchaser
/ user
to determine the suitability of each product for a particular application
and shall assume all risk and liability in connection therewith.
No warranty is implied with regard to information or recommendations
given
by our distributors and or subcontractors.
The descriptions of products and services displayed on this web site
and the
terms under which they are given may be modified at any time without
notice.
In any event or occurrence, our liability is strictly limited to
the value
of the original invoice.
Any links on this site are for the convenience of the visitor only
and we
are not responsible for their content. |
Lumirror® is a registered
trademark of Toray Industries, Inc. for its range of Polyester
Films based on Polyethylene Terephthalate. |
|