|
|
|
Printing Instructions |
|
Toray Saehan
|
Excell® XD40
|
Polyethylene Terephthalate (PET)
|
|
|
|
|
|
Description
|
Excell® XD40 offers excellent "processability" for
metallizing processes as well as winding process with Aluminium
sheet,
on top of excellent dielectric heat resistant properties.
|
Applications
|
Capacitors
|
Pre-treatment
|
None
|
Approvals
|
None
|
|
|
|
|
|
Properties |
Unit |
Test
Method |
Other |
|
|
|
Thickness
Micron |
um |
Micrometer
method
|
|
8.5 |
11.5 |
16 |
Mechanical
Properties MD |
Tensile Strength |
|
ASTM D 882A
|
|
30 |
30
|
30 |
Elongation
at break |
% |
ASTM D 882A
|
|
100 |
100
|
100 |
F-5
Value
|
kgf/mm2
|
ASTM D 882A |
|
11
|
11
|
11
|
Mechanical
Properties TD |
Tensile
Strength |
kgf/mm2 |
ASTM D 882A
|
|
30 |
30
|
30 |
Elongation
at break |
% |
|
|
100 |
100
|
100 |
F-5 Value |
kgf/mm2
|
ASTM D 882A
|
|
11
|
11
|
11
|
Other |
Surface Roughness
|
um
|
JIS B 0601
(2-Dimension)
(C/O:0.8mm) |
Ra
|
0.04 |
0.04 |
0.04 |
Surface Roughness
|
um
|
JIS B 0601
(2-Dimension)
(C/O:0.8mm)
|
Rz
|
0.60
|
0.60
|
0.60
|
Surface Roughness
|
um
|
JIS B 0601
(2-Dimension)
(C/O:0.8mm)
|
Rmax
|
0.80
|
0.80
|
0.80
|
Coefficient of Friction(Kinetic)
|
-
|
ASTM D 1894
|
|
0.5
|
0.5
|
0.5
|
Breakdown Voltage
|
KV
|
ATSM D 149
|
|
2.6
|
3.5
|
4.5
|
Volume Resistivity
|
Ohm cm
|
ATSM D 257
|
|
1 X 10(of 17 )
|
1 X 10(of 17 )
|
1 X 10(of 17 )
|
Dielectric Constant
|
-
|
IEC 250 (23Deg c,1 Khz)
|
|
3.2
|
3.2
|
3.2
|
Dielectric Loss Factor( Tan ) |
% |
IEC 250 (23Deg c,1 Khz)
|
|
0.40
|
0.40
|
0.40
|
Density |
g/cm3 |
ASTM D 1505
|
|
1.4 |
1.4
|
1.4 |
|
|
|
|
|
|
|
Heat
Shrinkage |
MD |
% |
TSI Method |
150Deg
c/30 min |
2.0 |
2.0
|
2.0 |
TD |
% |
TSI Method |
150 Deg
c / 30 min |
0.80 |
0.80
|
0.80 |
|
|
|
Other
Specifications: |
|
|
|
PSG
Group Ltd. - Disclaimer
All technical information and related data supplied by or on behalf
of PSG
Group Ltd. (and subsidiary companies) is believed to be accurate
and
complete. However, it will remain the responsibility of the purchaser
/ user
to determine the suitability of each product for a particular application
and shall assume all risk and liability in connection therewith.
No warranty is implied with regard to information or recommendations
given
by our distributors and or subcontractors.
The descriptions of products and services displayed on this web site
and the
terms under which they are given may be modified at any time without
notice.
In any event or occurrence, our liability is strictly limited to
the value
of the original invoice.
Any links on this site are for the convenience of the visitor only
and we
are not responsible for their content. |
Excell® is the registered trademark
for Toray Saehan Inc. |
|