|
|
|
Printing Instructions |
|
Toray Saehan
|
EXCELL® XP37
|
Polyethylene Terephthalate (PET) |
|
|
|
|
|
Description
|
EXCELL® XP37 Polyester Film is both sides corona treated
with good printability, for numerous kinds of inks and adhesives
|
Applications
|
Good for printing and laminating,suitable for food packaging
and similar applications
|
Pre-treatment
|
Corona treated on outside of custom roll, corona treated
side offers excellent wetability
|
Approvals
|
FDA Status: complies with the U.S Food & Drug Administration
21 CFR 177.1630 requirements for food packaging applications.
|
|
|
|
|
|
Properties
|
Unit
|
Test
Method
|
Other
|
|
|
|
Thickness
Micron
|
um
|
Micrometer
method
|
|
9
|
12
|
16
|
Thickness
Gauge
|
gauge
|
|
|
|
48
|
|
Thickness
Thou
|
"
|
|
|
|
.0005
|
|
Yield
|
Substance
Yield g/M2
|
g/M2
|
|
|
|
17
|
|
Yield
M2/ Kg
|
M2/Kg
|
|
|
|
59
|
|
Optical
Properties
|
Haze
|
%
|
ASTM
D 1003
|
|
3.5
|
3.8
|
3.8
|
Mechanical
Properties MD
|
Tensile
Strength
|
kgf/mm2
|
ASTM
D 882A
|
|
27
|
26
|
26
|
Elongation
at break
|
%
|
ASTM
D 882A
|
|
130
|
130
|
135
|
Youngs
Modulus
|
kgf/mm2
|
ASTM
D 882A
|
|
450
|
450
|
450
|
Mechanical
Properties TD
|
Tensile
Strength
|
kgf/mm2
|
ASTM
D 882A
|
|
25
|
25
|
25
|
Elongation
at break
|
%
|
ASTM
D 882A
|
|
135
|
135
|
135
|
Youngs
Modulus
|
kgf/mm2
|
ASTM
D 882A
|
|
500
|
500
|
500
|
Shrinkage
|
MD
|
%
|
TSI
Method
|
150 Deg
c/30 min
|
1.4
|
1.4
|
1.4
|
TD
|
%
|
TSI
Method
|
150 Deg
c/30 min
|
0.3
|
0.3
|
0.3
|
Other
|
Total
Luminous Transmission
|
%
|
ASTM
D 1003
|
|
89.7
|
89.6
|
89.6
|
Surface
Tension(corona
treated side)
|
dyne/cm
|
ASTM
D 2578
|
Corona
Treated Side
|
54
|
54
|
54
|
Oxygen
Permeability
|
cc/m2/24
hr
|
ASTM
D 3985
|
25
deg c, 75% R.H.,1atm
|
120
|
94
|
82
|
Water
Vapour Tranmission Rate
|
g/m2/24hr
|
ASTM
F 372
|
37.8
deg c, 90% R.H.,1atm
|
56
|
43
|
35
|
Density
|
g/cm3
|
ASTM
D 1505
|
|
1.4
|
1.4
|
1.4
|
|
|
Other
Specifications: |
|
|
|
PSG
Group Ltd. - Disclaimer
All technical information and related data supplied by or on behalf of
PSG
Group Ltd. (and subsidiary companies) is believed to be accurate and
complete. However, it will remain the responsibility of the purchaser /
user
to determine the suitability of each product for a particular application
and shall assume all risk and liability in connection therewith.
No warranty is implied with regard to information or recommendations given
by our distributors and or subcontractors.
The descriptions of products and services displayed on this web site and
the
terms under which they are given may be modified at any time without notice.
In any event or occurrence, our liability is strictly limited to the value
of the original invoice.
Any links on this site are for the convenience of the visitor only and
we
are not responsible for their content. |
Excell® is the registered trademark
for Toray Saehan Inc
|
|