|
|
|
|
|
|
MOTORCYCLE VISORS
(UNDER DEVELOPMENT): |
|
For optimal vision during
motorcycle driving and racing, polyester film has been used
in the creation
of tinted as well as special tear off visors.
INSTANT GREY TINTED VISORS
• Legal tinted inserts which simply stick to the
inside of your visor.
•Easy and quick to remove.
•Can be reused many times before a replacement is necessary
2 Grey visor inserts.
INSTANT TINTED MIRROR VISORS
•Legal tinted/mirrored inserts which simply sticks
to the inside of your visor.
•Easy and quick to remove.
•Can be reused many times before a replacement is necessary.
•Tinted on one side and mirrored on the other to avoid rider reflection.
-many colours available-
2 Grey / Metallised visor inserts.
2 Grey / Metallised / Blue visor inserts.
2 Grey / Metallised / Gold visor inserts.
2 Grey / Metallised / Red visor inserts.
2 Grey / Metallised / Purple visor inserts.
2 Grey / Metallised / Green visor inserts.
******NEW******
INSTANT IRIDIUM MIRROR VISORS
•Legal tinted/iridium inserts which simply sticks
to the inside of your visor.
•Easy and quick to remove.
•Can be reused many times before a replacement is necessary.
•Tinted on one side and iridium on the other to avoid rider reflection.
2 Grey / Metallised / Iridium visor inserts.
TEAR OFF VISORS
The earliest
solutions
involved layering clear polyester (plastic) on top of the face
shields/goggles and tearing the layers off as they got dirty.
However, this created a secondary problem (in some cases
the "solution" was
worse than the problem) as the layers stacked up vision was
reduced by the many surfaces the driver / rider had to look
through. In fact, since each tearoff has two sides (the front
and the back
side),
had to look look through 14 surfaces
if 7 tearoffs were stacked up.
That's
where Racing Optics™ comes in...Their patent* technology
laminates the tearoffs into
a single stack, effectively
reducing the number of surfaces down to two! They are stackable
up to 35 tearoffs.
Tear off's work like traditional products only easier...
and you can finally see where you are going.
Standard 'stacks' consists of 7 highest quality, optically
clear tearoffs...
20 seconds and you're ready to go.
35-2mil Clear laminated tearoffs.
15-4mil Clear laminated tear offs.
28-2mil Amber laminated tearoffs.
28-2mil Smoke laminated tearoffs.
|
|
|
|
|
|
Visor Inserts: |
|
Base Film for the manufacture of visors:
|
Polymex® PI121 |
|
|
PSG Group Ltd. - Disclaimer
All technical information and related data supplied by or on behalf of PSG
Group Ltd. (and subsidiary companies) is believed to be accurate and
complete. However, it will remain the responsibility of the purchaser / user
to determine the suitability of each product for a particular application
and shall assume all risk and liability in connection therewith.
No warranty is implied with regard to information or recommendations given
by our distributors and or subcontractors.
The descriptions of products and services displayed on this web site and
the
terms under which they are given may be modified at any time without notice.
In any event or occurrence, our liability is strictly limited to the value
of the original invoice.
Any links on this site are for the convenience of the visitor only and we
are not responsible for their content.
|
Polymex® is the registered trademark of PSG Group
|
|