|
|
|
|
Other services provided by PCL:
|
|
Slitting:
Polyester Converters have a variety of slitting machines, from 7mm-1600mm (with capabilities
of slitting up to 2200mm). We are specialist converters of Polyester Film, however
we can slit other materials, such as: paper, board, other materials (6-1000 micron),
and other films (6-1000 micron). A fully comprehensive and precise slitting service
is provided to convert customers own materials or the conversion of our own materials
to specification. We are capable of producing coils from 6mm up to 1600mm in
width. Rolls are supplied on 76mm or 152mm cores. All finished rolls are polythene
wrapped with plastic end inserts and labelled as required. |
|
|
|
Sheeting:
Polyester Converters have a complete range of sheeting facilities. PCL can sheet
all types and thicknesses of materials. From postage stamp dimensions to very
large sheets.
We can achieve tolerances of +/- 0.25mm. Achievable sizes at this tolerance are limited
to sheets up to 1500mm x 1650mm. Larger sheets may be obtained, depending on type
of material, up to 1524mm x 3500mm, where a tolerance is not so critical. All materials,
if required, can be interleaved with tissue and packed to specification. |
|
|
|
Guillotining:
PCL offer a first class guillotine service in the production of polyester film, paper
and other materials into sheet form. We can achieve tolerances of +/- 0.25mm.
Achievable sizes at this tolerance are limited to sheets up to 1500mm x 1650mm.
Larger sheets may be obtained, depending on type of material, up to 1524mm x
3500mm, where a tolerance is not so critical. |
|
|
|
Die-cut & Cut components:
Cut Components are manufactured and supplied to any specification. Materials include
polyester (colour coded to signify thickness) paper, polypropylene, pvc, plastic
and rubber etc. The materials used are too comprehensive to list and are suited
to all applications within the engineering trades and many others. PCL can Die-Cut
most materials, and would be more than happy to quote any enquiry. |
|
|
|
Adhesive Coating,
Metallising, Printing, Lacquering, Embossing, Dyeing, Speciality
Coatings:
We have the capabilities to coat, colour, metallise and apply many other secondary
processes to achieve a desired finish. Please contact us with your requirements.
More |
|
|
|
Stocking,
Packing & Logistics:
We can stock your products in our 40,000+ square foot premises, and distribute globally
with our extensive network. Please contact us with your requirements. |
|
|