|
|
|
Printing Instructions |
|
DuPont Teijin Films
|
Melinex® 329
Direct Print
|
Polyethylene Terephthalate (PET)
|
|
|
|
|
|
Description
|
Melinx® 329
Direct Print is an exceptionally white, opaque film. |
Applications
|
It is used as a base for pressure sensitive
label facestock. It can be printed by laser toner, thermal
transfer ribbon, Xeikon digital offset press and solvent
and water based inks. |
Pre-treatment
|
It is pretreated on one side to promote
adhesion to a wide variety of fixed and variable information
printing methods without the need for corona treatment or
off-line topcoating. |
Approvals
|
None |
|
|
|
|
|
Properties |
Unit |
Test
Method |
Other |
|
|
|
Thickness
Micron |
um |
Micrometer
method
|
|
50 |
|
|
Thickness Gauge |
gauge |
|
|
200 |
|
|
Thickness
Thou |
" |
|
|
.0020 |
|
|
Yield |
Substance
Yield g/M2 |
g/M2 |
|
|
71 |
|
|
Yield
M2/ Kg |
M2/Kg |
|
|
14 |
|
|
Mechanical
Properties MD |
Tensile Strength |
kgf/mm2 |
ASTM D 882-83
|
|
15.5 |
|
|
Elongation
at break
|
%
|
ASTM
D 882-83
|
|
115
|
|
|
Yeild
Strength
|
kgf/mm2
|
ASTM
D 882-83
|
|
7.3
|
|
|
Mechanical
Properties TD |
Tensile Strength
|
kgf/mm2
|
ASTM D 882-83
|
|
17 |
|
|
Elongation
at break
|
%
|
ASTM
D 882-83
|
|
90
|
|
|
Yeild
Strength
|
kgf/mm2
|
ASTM
D 882-83
|
|
7.3
|
|
|
Other |
Coefficient
of Friction (Dynamic)
|
%
|
ASTM
D1894-78
|
Face
to reverse side
|
0.4
|
|
|
Relative Density |
g/cm3 |
ASTM
D 1505-85 |
at
23°C |
1.43 |
|
|
Upper melt tempeture
|
°C
|
ASTM E794-85
|
|
255-260
|
|
|
Optical
|
Total Luminous Transmission |
% |
ASTM D1003-77 |
(Gardner Hazemeter) |
16 |
|
|
Gloss |
% |
ASTM D2457-90 |
(Gardner Hazemeter) |
40@45°
45@60° |
|
|
Shrinkage
|
MD
|
%
|
|
5
min at 90°C
|
2.8
|
|
|
TD
|
%
|
|
5
min at 90°C
|
1.0
|
|
|
Electrical
|
Permitivity(Dielectric Constant) |
|
ASTM D-150-81 |
|
|
|
|
23 C, 100Hz |
|
ASTM D-150-81
|
|
2.6 |
|
|
23 C, 1KHz |
|
ASTM D-150-81
|
|
2.6 |
|
|
23 C, 1MHz |
|
ASTM D-150-81
|
|
2.4 |
|
|
Other |
|
Other
Specifications: |
|
PSG
Group Ltd. - Disclaimer
All technical information and related data supplied by or on behalf
of PSG
Group Ltd. (and subsidiary companies) is believed to be accurate
and
complete. However, it will remain the responsibility of the purchaser
/ user
to determine the suitability of each product for a particular application
and shall assume all risk and liability in connection therewith.
No warranty is implied with regard to information or recommendations
given
by our distributors and or subcontractors.
The descriptions of products and services displayed on this web site
and the
terms under which they are given may be modified at any time without
notice.
In any event or occurrence, our liability is strictly limited to
the value
of the original invoice.
Any links on this site are for the convenience of the visitor only
and we
are not responsible for their content. |
Melinex® registered trademark
of DuPont Teijin Films. Only DuPont Teijin Films makes Melinex® brand polyester film |
|